SCOUT

Jeff and Meg Pierce have returned to us for another classic looking boat in the vein of the rumrunners of old. While their first boat built with us, COMET, has been a huge success for their use on the Cape, the new boat will be heading to the west coast of Florida for picnics and short junkets. Aluminum-built, the 31' open center console features plenty of teak and varnished wood on her as well. She is powered by a 422 hp Volvo D6-435 diesel connected to a Hamilton 292 Jet for a top speed of 34 knots. Dieter Empacher designed her as he did with their companion commuter express launch COMET. Jeff's company, Pierce Aluminum, supplied all the water jet cut aluminum plate for this project which makes the layout so much easier. The aluminum hull construction phase was the third done completely by Lyman-Morse at our metal fabrication facility just a short distance from our main yard.
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 08/20/2009    © 2009 billy black
      © 2009 billy black
  • 12/10/2008   
     
  • 12/04/2008 Setting up frames for the hull  
    Setting up frames for the hull  
  • 08/05/2008 Taking on the hull  plating  
    Taking on the hull plating  
  • 07/31/2008 Tacking on the hull plating  
    Tacking on the hull plating  
  • 12/04/2008 Fitting the fuel tanks  
    Fitting the fuel tanks  
  • 10/13/2008 Cockpit sole is installed  
    Cockpit sole is installed  
  • 11/18/2008 Installing the jet drive  
    Installing the jet drive  
  • 01/05/2009 Hull is moved to building #1.  
    Hull is moved to building #1.  
  • 01/12/2009 Cockpit sole has been primed and side decks are being faired.  
    Cockpit sole has been primed and side decks are being faired.  
  • 01/26/2009 Installing cleats for hull ceiling  
    Installing cleats for hull ceiling  
  • 02/03/2009 Installing fwd seating  
    Installing fwd seating  
  • 02/23/2009 Preping console hardtop for instillation.  
    Preping console hardtop for instillation.  
  • 03/16/2009 Fitting dash in console.  
    Fitting dash in console.  
  • 03/23/2009 Fitting teak to console.  
    Fitting teak to console.  
  • 04/20/2009 Finishing up teak engine box.  
    Finishing up teak engine box.  
  • 05/26/2009 Fitting teak toerail.  
    Fitting teak toerail.  
  • 05/26/2009 Fitting anchor roller.  
    Fitting anchor roller.  
  • 05/26/2009 Gluing in teak seat back around aft settee.  
    Gluing in teak seat back around aft settee.  
  • 06/08/2009 Fitting cap on aft settee seat back.  
    Fitting cap on aft settee seat back.  
  • 06/22/2009 Fitting nosing detail on hardtop.  
    Fitting nosing detail on hardtop.  
  • 06/29/2009 Installing spring chock/cleat.  
    Installing spring chock/cleat.  
  • 06/29/2009 Installing console instruments and electronics.  
    Installing console instruments and electronics.  
  • 07/07/2009 Fitting locker doors in console.  
    Fitting locker doors in console.  

Recently Launched

Kiwi Spirit/Paris 63

Kiwi Spirit/Paris 63

Transition

Transition

Lionheart Concerto

Lionheart Concerto
YBAA Association of Yacht Sales Professionals